"Boring Bars" in the category Business, Industry & Science

Welcome to Wunderstore, Britains's largest product search site with price comparison. You are currently in the Business, Industry & Science category in the "Boring Bars" department. With Wunderstore, you can browse more than 100 online shops for offers. In this way, you'll find almost every product from the Business, Industry & Science: Boring Bars section on our site that is currently available to buy online. And the best thing: not only will we show you which online shop you can currently buy the particular product you're looking for from, but we'll also let slip where you can buy that product at the best price!

To conduct a more targeted search, you can restrict the product selection to specific sub-sections. You can also run a specific targeted search for products from particular brands with us. Use the search field or the filter at the side for this. In this way, you can restrict the product selection to Korloy, Micro 100, Sandvik Coromant or TEKNIK, for example. You can also use the filter at the side to search for products in specific colours or within certain price segments. And if you're on the hunt for a bargain, use the "Sale Filter" to find currently reduced items. In any case, we hope that we can help you with your search for good, well-priced offers on the internet using our price comparison tool.

Boring Bars: How you can benefit from comparing prices

Price trend for the Boring Bars product range in the Business, Industry & Science product group

Online shops constantly optimise their prices. Some prices are updated several times a day and adapted in line with competitors’ offers. Our price trend shows you the trend development of prices for products in the Business, Industry & Science/Boring Bars product range over the last few weeks and months.

We also, however, tell you when you can typically pick up products from the Business, Industry & Science/Boring Bars product range at a particularly attractive price. A good time is, for example, on tuesdays. For more details, see the price analysis graphs below.

By comparing prices, you can save a lot of money, in particular on big-ticket items. To make this extra easy for you, we show you for each product the online shop in which we found the current best offer and how much you can save in absolute and percentage terms with a price comparison.
Show details: When are products in the Boring Bars product range in the Business, Industry & Science product group particularly cheap?

Have you already thought about the right time to purchase of products in the Boring Bars product range in the Business, Industry & Science product group? We tell you the days of the week and specific times when the prices are particularly attractive.

Tuesday is the cheapest day of the week
mon
tue
wed
thu
fri
sat
sun
On mondays, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are largely the same as the weekly average. monday is typically neither a particularly expensive nor a particularly cheap day on which to buy these products.
On tuesdays, products from the Boring Bars product range in the „Business, Industry & Science“ product group tend to be cheaper than the weekly average. The prices are around 24.8% lower than the average weekly price.
On wednesdays, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are largely the same as the weekly average. wednesday is typically neither a particularly expensive nor a particularly cheap day on which to buy these products.
On thursdays, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are largely the same as the weekly average. thursday is typically neither a particularly expensive nor a particularly cheap day on which to buy these products.
On fridays, products from the Boring Bars product range in the „Business, Industry & Science“ product group are slightly more expensive than the weekly average. The prices are around 4.1% higher than the average weekly price.
On saturdays, products from the Boring Bars product range in the „Business, Industry & Science“ product group are slightly more expensive than the weekly average. The prices are around 2% higher than the average weekly price.
On sundays, products from the Boring Bars product range in the „Business, Industry & Science“ product group tend to be cheaper than the weekly average. The prices are around 1.1% lower than the average weekly price.
-19.9%
+19.9%
100%
Average price
Are you already doing something between 23:00 and 24:00?
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 0:00 and 1:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 1:00 and 2:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 2:00 and 3:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 3:00 and 4:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 4:00 and 5:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 5:00 and 6:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 6:00 and 7:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 7:00 and 8:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 8:00 and 9:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 9:00 and 10:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 10:00 and 11:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 11:00 and 12:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 12:00 and 13:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 13:00 and 14:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 14:00 and 15:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 15:00 and 16:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 16:00 and 17:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 17:00 and 18:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 18:00 and 19:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 19:00 and 20:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 20:00 and 21:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 21:00 and 22:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 22:00 and 23:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 23:00 and 24:00, they are, however, largely in line with the daily average.
-0.2%
+0.2%
100%
Average price
It is probably not a bad idea to shop online for Boring Bars on tuesday between 6:00 and 12:00.
Monday
0-6
6-12
12-18
18-24
Tuesday
0-6
6-12
12-18
18-24
Wednesday
0-6
6-12
12-18
18-24
Thursday
0-6
6-12
12-18
18-24
Friday
0-6
6-12
12-18
18-24
Saturday
0-6
6-12
12-18
18-24
Sunday
0-6
6-12
12-18
18-24
On mondays between 0:00 and 6:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On mondays between 6:00 and 12:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On mondays between 12:00 and 18:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On mondays between 18:00 and 24:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On tuesdays between 0:00 and 6:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 14.9% lower than their respective average weekly price.
This is the best time to buy.
On tuesdays between 6:00 and 12:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 24.9% lower than their respective average weekly price.
On tuesdays between 12:00 and 18:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 17.7% lower than their respective average weekly price.
On tuesdays between 18:00 and 24:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 16.8% lower than their respective average weekly price.
On wednesdays between 0:00 and 6:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 2.5% higher than their respective average weekly price.
On wednesdays between 6:00 and 12:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 1.5% higher than their respective average weekly price.
On wednesdays between 12:00 and 18:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On wednesdays between 18:00 and 24:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On thursdays between 0:00 and 6:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On thursdays between 6:00 and 12:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 1.1% lower than their respective average weekly price.
On thursdays between 12:00 and 18:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On thursdays between 18:00 and 24:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On fridays between 0:00 and 6:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 2.2% higher than their respective average weekly price.
Purchases can be expensive here.
On fridays between 6:00 and 12:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 2.5% higher than their respective average weekly price.
On fridays between 12:00 and 18:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 2% higher than their respective average weekly price.
On fridays between 18:00 and 24:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 2% higher than their respective average weekly price.
On saturdays between 0:00 and 6:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On saturdays between 6:00 and 12:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On saturdays between 12:00 and 18:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On saturdays between 18:00 and 24:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On sundays between 0:00 and 6:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On sundays between 6:00 and 12:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On sundays between 12:00 and 18:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On sundays between 18:00 and 24:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
-19.9%
+19.9%
100%
Average price

Boring Bars

Korloy 6-01-017530 STUPL 20mm Diameter Through Coolant Boring Bar Carbide Shank Left Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 6-01-017530 STUPL 20mm Diameter Through Coolant Boring Bar Carbide Shank Left Hand
from Korloy
found at Amazon
444.52 £
Shipping costs: 0.00 £
Sandvik Coromant E06M-STFCR 1.8 Coroturn 107 Solid Carbide Boring Bar For Turning from Sandvik Coromant
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Sandvik Coromant E06M-STFCR 1.8 Coroturn 107 Solid Carbide Boring Bar For Turning
found at Amazon
222.74 £
Shipping costs: 0.00 £
Micro 100 DBM-080250X Coolant Through Boring Tools for MIniDigi Boring Heads, AlTiN Coated, 0.080" Minimum Bore Diameter, 0.250" Maximum Bore Depth, 8 mm Shank Diameter, 1.5" Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100 DBM-080250X Coolant Through Boring Tools for MIniDigi Boring Heads, AlTiN Coated, 0.080" Minimum Bore Diameter, 0.250" Maximum Bore Depth, 8 mm Shank Diameter, 1.5" Overall Length
found at Amazon Marketplace
44.64 £
Shipping costs: 3.60 £
Mitsubishi Materials MMTIR102-0.60-2.5-C Internal Threading Boring Bar with MMT11IR Insert, Right, With Coolant, 2.5° Angle, 0.625" Shank Dia, 0.600" Cutting Dia. from Mitsubishi Materials
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Mitsubishi Materials MMTIR102-0.60-2.5-C Internal Threading Boring Bar with MMT11IR Insert, Right, With Coolant, 2.5° Angle, 0.625" Shank Dia, 0.600" Cutting Dia.
found at Amazon Marketplace
32.33 £
Shipping costs: 4.31 £
Korloy 1-06-038651 STFCR 12mm Diameter Through Coolant Boring Bar Steel Shank Right Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-038651 STFCR 12mm Diameter Through Coolant Boring Bar Steel Shank Right Hand
from Korloy
found at Amazon
50.79 £
Shipping costs: 0.00 £
Micro 100 QMRR-020-100-060 Quick Change Miniature Retaining Ring Grooving Tool, Solid Carbide Tool, 0.020" (0.51 mm) Groove Width, 0.030" (0.76 mm) Projection, 0.060"(1.52 mm) Minimum Bore Diameter, 0.100" (2.5 mm) Maximum Bore Depth, 0.1875" (4.8 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100 QMRR-020-100-060 Quick Change Miniature Retaining Ring Grooving Tool, Solid Carbide Tool, 0.020" (0.51 mm) Groove Width, 0.030" (0.76 mm) Projection, 0.060"(1.52 mm) Minimum Bore Diameter, 0.100" (2.5 mm) Maximum Bore Depth, 0.1875" (4.8 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length
found at Amazon Marketplace
7.43 £
Shipping costs: 3.57 £
Korloy 1-06-006374 SCLCR 08 10mm Diameter Boring Bar Steel Shank Right Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-006374 SCLCR 08 10mm Diameter Boring Bar Steel Shank Right Hand
from Korloy
found at Amazon
70.20 £
Shipping costs: 0.00 £
Teknik S32T-MTUNR-16 Steel Boring Bar for TNMG from Teknik
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Teknik S32T-MTUNR-16 Steel Boring Bar for TNMG
from Teknik
found at Amazon
71.22 £
Shipping costs: 0.00 £
Micro 100 QRB-3601250 Quick Change Reverse Boring Tool, Solid Carbide Tool, 0.360" (9.14 mm) Minimum Bore Diameter, 1.250"(31.8 mm) Maximum Bore Depth, 0.163"(4.14 mm) Tool Head Length, 0.130"(3.30 mm) Projection, 0.008"(0.20 mm) Tool Radius, 0.3750"(9.4 mm) Shank Diameter, 3"(76 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100 QRB-3601250 Quick Change Reverse Boring Tool, Solid Carbide Tool, 0.360" (9.14 mm) Minimum Bore Diameter, 1.250"(31.8 mm) Maximum Bore Depth, 0.163"(4.14 mm) Tool Head Length, 0.130"(3.30 mm) Projection, 0.008"(0.20 mm) Tool Radius, 0.3750"(9.4 mm) Shank Diameter, 3"(76 mm) Overall Length
found at Amazon Marketplace
62.15 £
Shipping costs: 3.68 £
Micro 100 QBM-3602000X Right Hand Quick Change Boring Tool for Milling Machine, Solid Carbide Tool, AlTiN Coated, 0.360"(9.14 mm) Minimum Bore Diameter, 2.000" (50.8 mm) Maximum Bore Depth, 0.175" (4.50 mm)Tip of Centerline to Cutting Tip, 0.008" (0.20 mm) Tool Radius, 0.3750" (9.5 mm) Shank Diameter, 3-1/2"(89 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100 QBM-3602000X Right Hand Quick Change Boring Tool for Milling Machine, Solid Carbide Tool, AlTiN Coated, 0.360"(9.14 mm) Minimum Bore Diameter, 2.000" (50.8 mm) Maximum Bore Depth, 0.175" (4.50 mm)Tip of Centerline to Cutting Tip, 0.008" (0.20 mm) Tool Radius, 0.3750" (9.5 mm) Shank Diameter, 3-1/2"(89 mm) Overall Length
found at Amazon Marketplace
15.88 £
Shipping costs: 3.75 £
Micro 100 QBB-230500X Right Hand Cutting Radius Quick Change Boring Tool, Solid Carbide Tool, AlTiN Coated, 0.230"(5.84 mm) Minimum Bore Diameter, 0.500" (12.7 mm) Maximum Bore Depth, 0.050" (1.27 mm) Projection, 0.005" (0.13 mm) Tool Radius, 0.3125" (7.9 mm) Shank Diameter, 2"(51 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100 QBB-230500X Right Hand Cutting Radius Quick Change Boring Tool, Solid Carbide Tool, AlTiN Coated, 0.230"(5.84 mm) Minimum Bore Diameter, 0.500" (12.7 mm) Maximum Bore Depth, 0.050" (1.27 mm) Projection, 0.005" (0.13 mm) Tool Radius, 0.3125" (7.9 mm) Shank Diameter, 2"(51 mm) Overall Length
found at Amazon Marketplace
145.60 £
Shipping costs: 2.80 £
Korloy 6-01-014005 STFCL 8mm Diameter Through Coolant Boring Bar Carbide Shank Left Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 6-01-014005 STFCL 8mm Diameter Through Coolant Boring Bar Carbide Shank Left Hand
from Korloy
found at Amazon
97.80 £
Shipping costs: 0.00 £
Micro 100 QMBB-060150X Quick Change Miniature Boring Tool, Solid Carbide Tool, AlTiN Coated, 0.060"(1.52 mm) Minimum Bore Diameter, 0.150" (3.8 mm) Maximum Bore Depth, 0.015" (0.38 mm) Projection, 0.1875" (4.8 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100 QMBB-060150X Quick Change Miniature Boring Tool, Solid Carbide Tool, AlTiN Coated, 0.060"(1.52 mm) Minimum Bore Diameter, 0.150" (3.8 mm) Maximum Bore Depth, 0.015" (0.38 mm) Projection, 0.1875" (4.8 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length
found at Amazon Marketplace
6.40 £
Shipping costs: 3.55 £
Korloy 1-06-019737 PDSNL 32mm Diameter Boring Bar Steel Shank Left Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-019737 PDSNL 32mm Diameter Boring Bar Steel Shank Left Hand
from Korloy
found at Amazon
76.04 £
Shipping costs: 0.00 £
Micro 100 QRB-3601500 Quick Change Reverse Boring Tool, Solid Carbide Tool, 0.360" (9.14 mm) Minimum Bore Diameter, 1.500"(38.1 mm) Maximum Bore Depth, 0.163"(4.14 mm) Tool Head Length, 0.130"(3.30 mm) Projection, 0.008"(0.20 mm) Tool Radius, 0.3750"(9.4 mm) Shank Diameter, 3"(76 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100 QRB-3601500 Quick Change Reverse Boring Tool, Solid Carbide Tool, 0.360" (9.14 mm) Minimum Bore Diameter, 1.500"(38.1 mm) Maximum Bore Depth, 0.163"(4.14 mm) Tool Head Length, 0.130"(3.30 mm) Projection, 0.008"(0.20 mm) Tool Radius, 0.3750"(9.4 mm) Shank Diameter, 3"(76 mm) Overall Length
found at Amazon Marketplace
11.39 £
Shipping costs: 3.68 £
Korloy 1-06-019868 DWLNL 40mm Diameter Boring Bar Steel Shank Left Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-019868 DWLNL 40mm Diameter Boring Bar Steel Shank Left Hand
from Korloy
found at Amazon
153.26 £
Shipping costs: 0.00 £
Teknik S50U-DCLNR-12 Steel Boring Bar for CNMG from Teknik
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Teknik S50U-DCLNR-12 Steel Boring Bar for CNMG
from Teknik
found at Amazon
105.02 £
Shipping costs: 0.00 £
HHIP R8 DRAW BAR BORING SHANK WITH 7/8"-20 THREADED MOUNT (1001-1090) from Pro-Series by HHIP
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
HHIP R8 DRAW BAR BORING SHANK WITH 7/8"-20 THREADED MOUNT (1001-1090)
found at Amazon
35.03 £
Shipping costs: 0.00 £
Korloy 1-06-038652 STFPL 12mm Diameter Through Coolant Boring Bar Steel Shank Left Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-038652 STFPL 12mm Diameter Through Coolant Boring Bar Steel Shank Left Hand
from Korloy
found at Amazon
50.79 £
Shipping costs: 0.00 £
Korloy 1-06-006240 SCLCL 10mm Diameter Boring Bar Steel Shank Left Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-006240 SCLCL 10mm Diameter Boring Bar Steel Shank Left Hand
from Korloy
found at Amazon
29.84 £
Shipping costs: 0.00 £
Sandvik Coromant A316-10SM440-03704K 1030 CoroMill 316 solid carbide head for square shoulder milling from Sandvik Coromant
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Sandvik Coromant A316-10SM440-03704K 1030 CoroMill 316 solid carbide head for square shoulder milling
found at Amazon
50.45 £
Shipping costs: 0.00 £
Micro 100, BB-3601250X, Right Hand Cutting Radius Boring Tool, AlTiN Coated, 0.360" Minimum Bore Diameter, 1.250" Maximum Bore Depth, 0.090" Projection, 0.005" Tool Radius, 3/8" Shank Diameter, 2-1/2" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100, BB-3601250X, Right Hand Cutting Radius Boring Tool, AlTiN Coated, 0.360" Minimum Bore Diameter, 1.250" Maximum Bore Depth, 0.090" Projection, 0.005" Tool Radius, 3/8" Shank Diameter, 2-1/2" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
56.54 £
Shipping costs: 3.72 £
Korloy 1-06-006308 SDQCL 12mm Diameter Through Coolant Boring Bar Steel Shank Left Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-006308 SDQCL 12mm Diameter Through Coolant Boring Bar Steel Shank Left Hand
from Korloy
found at Amazon
50.79 £
Shipping costs: 0.00 £
Sandvik Coromant E04H-SWLPR 1.2-R Coroturn 111 Solid Carbide Boring Bar For Turning from Sandvik Coromant
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Sandvik Coromant E04H-SWLPR 1.2-R Coroturn 111 Solid Carbide Boring Bar For Turning
found at Amazon
148.49 £
Shipping costs: 0.00 £
Micro 100, BB-140250S, Right Hand Boring Tool (No Cutting Radius), 0.140" Minimum Bore Diameter, 0.250" Maximum Bore Depth, 0.035" Projection, 3/16" Shank Diameter, 2" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100, BB-140250S, Right Hand Boring Tool (No Cutting Radius), 0.140" Minimum Bore Diameter, 0.250" Maximum Bore Depth, 0.035" Projection, 3/16" Shank Diameter, 2" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
6.41 £
Shipping costs: 3.68 £
Micro 100 QBB-2901750X Right Hand Cutting Radius Quick Change Boring Tool, Solid Carbide Tool, AlTiN Coated, 0.290"(7.37 mm) Minimum Bore Diameter, 1.750" (44.5 mm) Maximum Bore Depth, 0.050" (1.27 mm) Projection, 0.005" (0.13 mm) Tool Radius, 0.3125" (7.9 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100 QBB-2901750X Right Hand Cutting Radius Quick Change Boring Tool, Solid Carbide Tool, AlTiN Coated, 0.290"(7.37 mm) Minimum Bore Diameter, 1.750" (44.5 mm) Maximum Bore Depth, 0.050" (1.27 mm) Projection, 0.005" (0.13 mm) Tool Radius, 0.3125" (7.9 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length
found at Amazon Marketplace
43.76 £
Shipping costs: 3.64 £
Micro 100 QPF-2301000 Quick Change Boring and Profiling Tool, Solid Carbide Tool, 0.230" (5.84 mm) Minimum Bore Diameter, 1.000" (25.4 mm) Maximum Bore Depth, 0.080" (2.03 mm) Projection, 0.008" (0.20 mm) Tool Radius, 0.3125" (7.9 mm) Shank Diameter, 2.5" (64 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100 QPF-2301000 Quick Change Boring and Profiling Tool, Solid Carbide Tool, 0.230" (5.84 mm) Minimum Bore Diameter, 1.000" (25.4 mm) Maximum Bore Depth, 0.080" (2.03 mm) Projection, 0.008" (0.20 mm) Tool Radius, 0.3125" (7.9 mm) Shank Diameter, 2.5" (64 mm) Overall Length
found at Amazon Marketplace
44.91 £
Shipping costs: 3.64 £
Micro 100 HBB-025125X Helical Back Rake Boring Tool, Aluminum/Tin Coated, 0.025" Minimum Bore Diameter, 0.125" Maximum Bore Depth, 0.1250" Shank Diameter, 0.020" Neck Diameter, 1.5" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100 HBB-025125X Helical Back Rake Boring Tool, Aluminum/Tin Coated, 0.025" Minimum Bore Diameter, 0.125" Maximum Bore Depth, 0.1250" Shank Diameter, 0.020" Neck Diameter, 1.5" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
32.50 £
Shipping costs: 3.53 £
Micro 100, BBM-080820X, Right Hand Boring Tool (No Cutting Radius) AlTiN Coated, Metric Dimensions, 8mm Minimum Bore Diameter, 20mm Maximum Bore Depth, 2.00mm Projection, 8mm Shank Diameter, 63mm Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100, BBM-080820X, Right Hand Boring Tool (No Cutting Radius) AlTiN Coated, Metric Dimensions, 8mm Minimum Bore Diameter, 20mm Maximum Bore Depth, 2.00mm Projection, 8mm Shank Diameter, 63mm Overall Length, Solid Carbide Tool
found at Amazon Marketplace
39.97 £
Shipping costs: 3.64 £
Teknik S32T-SVUBL-16 Steel Boring Bar for VBMT/VBGT from Teknik
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Teknik S32T-SVUBL-16 Steel Boring Bar for VBMT/VBGT
from Teknik
found at Amazon
59.97 £
Shipping costs: 0.00 £
Micro 100 QFR-025-4X Quick Change Full Radius Grooving Tool, Solid Carbide Tool, AlTiN Coated, 0.025" (0.64 mm) Groove Width, 0.050" (1.27 mm) Projection, 0.245" (6.2 mm) Minimum Bore Diameter, 0.250" (6.4 mm) Maximum Bore Depth, 0.2500" (6.4 mm) Shank Diameter, 2" (51 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100 QFR-025-4X Quick Change Full Radius Grooving Tool, Solid Carbide Tool, AlTiN Coated, 0.025" (0.64 mm) Groove Width, 0.050" (1.27 mm) Projection, 0.245" (6.2 mm) Minimum Bore Diameter, 0.250" (6.4 mm) Maximum Bore Depth, 0.2500" (6.4 mm) Shank Diameter, 2" (51 mm) Overall Length
found at Amazon Marketplace
8.81 £
Shipping costs: 3.60 £
Korloy 1-06-038835 SVQCL 25mm Diameter Boring Bar Steel Shank Left Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-038835 SVQCL 25mm Diameter Boring Bar Steel Shank Left Hand
from Korloy
found at Amazon
55.20 £
Shipping costs: 0.00 £
Korloy 1-06-002264 STFPL 20mm Diameter Boring Bar Steel Shank Left Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-002264 STFPL 20mm Diameter Boring Bar Steel Shank Left Hand
from Korloy
found at Amazon
48.60 £
Shipping costs: 0.00 £
KYOCERA MBE-1000L600 Micro Boring bar, Carbide, 0.1250" Shank Diameter, 0.600" Max Bore Depth, 1.5000" Length from Kyocera
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
KYOCERA MBE-1000L600 Micro Boring bar, Carbide, 0.1250" Shank Diameter, 0.600" Max Bore Depth, 1.5000" Length
from Kyocera
found at Amazon Marketplace
6.71 £
Shipping costs: 3.56 £
Micro 100, BB-320500SX, Right Hand Boring Tool (No Cutting Radius), AlTiN Coated, 0.320" Minimum Bore Diameter, 0.500" Maximum Bore Depth, 0.080" Projection, 3/8" Shank Diameter, 2-1/2" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100, BB-320500SX, Right Hand Boring Tool (No Cutting Radius), AlTiN Coated, 0.320" Minimum Bore Diameter, 0.500" Maximum Bore Depth, 0.080" Projection, 3/8" Shank Diameter, 2-1/2" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
55.20 £
Shipping costs: 3.72 £
Korloy 1-06-038728 SSKCR 32mm Diameter Through Coolant Boring Bar Steel Shank Right Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-038728 SSKCR 32mm Diameter Through Coolant Boring Bar Steel Shank Right Hand
from Korloy
found at Amazon
94.73 £
Shipping costs: 0.00 £
Micro 100 QIT-140500X Quick Change Internal Single Point Threading Tool, Solid Carbide Tool, AlTiN Coated, 0.140" (3.56 mm) Minimum Bore Diameter, 0.035" (0.89 mm) Projection, 0.500" (12.7 mm) Maximum Bore Depth, 0.020" (0.51 mm) Offset Point, 20 to 56 Threads per Inch, 0.1875" (4.8 mm) Shank Diameter, 1.5" (38 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100 QIT-140500X Quick Change Internal Single Point Threading Tool, Solid Carbide Tool, AlTiN Coated, 0.140" (3.56 mm) Minimum Bore Diameter, 0.035" (0.89 mm) Projection, 0.500" (12.7 mm) Maximum Bore Depth, 0.020" (0.51 mm) Offset Point, 20 to 56 Threads per Inch, 0.1875" (4.8 mm) Shank Diameter, 1.5" (38 mm) Overall Length
found at Amazon Marketplace
7.63 £
Shipping costs: 3.55 £
Micro 100 QMRR-020-500-100X Quick Change Miniature Retaining Ring Grooving Tool, Solid Carbide Tool, AlTiN Coated, 0.020" (0.51 mm) Groove Width, 0.030" (0.76 mm) Projection, 0.100"(2.54 mm) Minimum Bore Diameter, 0.500" (12.7 mm) Maximum Bore Depth, 0.1875" (4.8 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100 QMRR-020-500-100X Quick Change Miniature Retaining Ring Grooving Tool, Solid Carbide Tool, AlTiN Coated, 0.020" (0.51 mm) Groove Width, 0.030" (0.76 mm) Projection, 0.100"(2.54 mm) Minimum Bore Diameter, 0.500" (12.7 mm) Maximum Bore Depth, 0.1875" (4.8 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length
found at Amazon Marketplace
37.76 £
Shipping costs: 3.55 £
Micro 100, BB-200500G, Right Hand Cutting Radius Boring Tool, TiN Coated, 0.200" Minimum Bore Diameter, 0.500" Maximum Bore Depth, 0.050" Projection, 0.005" Tool Radius, 1/4" Shank Diameter, 2-1/2" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100, BB-200500G, Right Hand Cutting Radius Boring Tool, TiN Coated, 0.200" Minimum Bore Diameter, 0.500" Maximum Bore Depth, 0.050" Projection, 0.005" Tool Radius, 1/4" Shank Diameter, 2-1/2" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
30.29 £
Shipping costs: 3.55 £
Korloy 1-06-018464 SVUCL 20mm Diameter Boring Bar Steel Shank Left Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-018464 SVUCL 20mm Diameter Boring Bar Steel Shank Left Hand
from Korloy
found at Amazon
48.60 £
Shipping costs: 0.00 £
Korloy 6-01-017478 STFCL 10mm Diameter Boring Bar Carbide Shank Left Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 6-01-017478 STFCL 10mm Diameter Boring Bar Carbide Shank Left Hand
from Korloy
found at Amazon
84.46 £
Shipping costs: 0.00 £
Teknik S50U-DDWNR-15 Steel Boring Bar for DNMG from Teknik
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Teknik S50U-DDWNR-15 Steel Boring Bar for DNMG
from Teknik
found at Amazon
105.02 £105.65 £
Shipping costs: 0.00 £
- 1%
Korloy 1-06-034731 SDUCL 40mm Diameter Boring Bar Steel Shank Left Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-034731 SDUCL 40mm Diameter Boring Bar Steel Shank Left Hand
from Korloy
found at Amazon
88.58 £
Shipping costs: 0.00 £
Micro 100 QPR-2301250X Quick Change Profiling Tool, Solid Carbide Tool, AlTiN Coated, 0.230" (5.84 mm) Minimum Bore Diameter, 1.250" (31.8 mm) Maximum Bore Depth, 0.080" (2.03 mm) Projection, 0.008" (0.20 mm) Tool Radius, 0.3125" (7.9 mm) Shank Diameter Shank Diameter, 2.5" (64 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100 QPR-2301250X Quick Change Profiling Tool, Solid Carbide Tool, AlTiN Coated, 0.230" (5.84 mm) Minimum Bore Diameter, 1.250" (31.8 mm) Maximum Bore Depth, 0.080" (2.03 mm) Projection, 0.008" (0.20 mm) Tool Radius, 0.3125" (7.9 mm) Shank Diameter Shank Diameter, 2.5" (64 mm) Overall Length
found at Amazon Marketplace
9.60 £
Shipping costs: 3.55 £
Korloy 1-06-038724 PTFNL 32mm Diameter Through Coolant Boring Bar Steel Shank Left Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-038724 PTFNL 32mm Diameter Through Coolant Boring Bar Steel Shank Left Hand
from Korloy
found at Amazon
102.16 £
Shipping costs: 0.00 £
KYOCERA MBE-0354L118 Micro Boring Bar, Carbide, 3 mm Shank Diameter, 3 mm Max Bore Depth, 38 mm Length from Kyocera
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
KYOCERA MBE-0354L118 Micro Boring Bar, Carbide, 3 mm Shank Diameter, 3 mm Max Bore Depth, 38 mm Length
from Kyocera
found at Amazon Marketplace
7.55 £
Shipping costs: 3.56 £
Micro 100 ITL-100250X Left Hand 60° Internal Single Point Threading Tool, Aluminum/Tin Coated, 0.100" Minimum Minor Diameter, 0.025" Projection, 0.250" Maximum Bore Depth, 0.014" Offset Point, 32 to 64 Threads per Inch, 0.125" Shank Diameter, 1.5" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100 ITL-100250X Left Hand 60° Internal Single Point Threading Tool, Aluminum/Tin Coated, 0.100" Minimum Minor Diameter, 0.025" Projection, 0.250" Maximum Bore Depth, 0.014" Offset Point, 32 to 64 Threads per Inch, 0.125" Shank Diameter, 1.5" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
31.79 £
Shipping costs: 3.53 £
Aloris Tool CBB-3 Adjustable Chip Breaker Boring Bar from Aloris Tool
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Aloris Tool CBB-3 Adjustable Chip Breaker Boring Bar
found at Amazon Marketplace
170.84 £
Shipping costs: 5.12 £
HHIP 1001-0775 Round Shank Indexable Boring Bar, 3-5/8" x 3/4"' from HHIP
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
HHIP 1001-0775 Round Shank Indexable Boring Bar, 3-5/8" x 3/4"'
from HHIP
found at Amazon Marketplace
33.76 £
Shipping costs: 5.11 £
Teknik A20Q-SVUCL-11 Through Coolant Boring Bar for VCMT/VCGT from Teknik
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Teknik A20Q-SVUCL-11 Through Coolant Boring Bar for VCMT/VCGT
from Teknik
found at Amazon
42.10 £
Shipping costs: 0.00 £
Micro 100, BB-3201600X, Right Hand Cutting Radius Boring Tool, AlTiN Coated, 0.320" Minimum Bore Diameter, 1.600" Maximum Bore Depth, 0.080" Projection, 0.005" Tool Radius, 3/8" Shank Diameter, 2-1/2" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100, BB-3201600X, Right Hand Cutting Radius Boring Tool, AlTiN Coated, 0.320" Minimum Bore Diameter, 1.600" Maximum Bore Depth, 0.080" Projection, 0.005" Tool Radius, 3/8" Shank Diameter, 2-1/2" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
56.54 £
Shipping costs: 3.72 £
Korloy 1-06-002095 SCLCL 10mm Diameter Through Coolant Boring Bar Steel Shank Left Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-002095 SCLCL 10mm Diameter Through Coolant Boring Bar Steel Shank Left Hand
from Korloy
found at Amazon
46.95 £
Shipping costs: 0.00 £
Sandvik Coromant A32T-SDUCL11-X CoroTurn 107 boring bar for back boring from Sandvik Coromant
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Sandvik Coromant A32T-SDUCL11-X CoroTurn 107 boring bar for back boring
found at Amazon
190.79 £
Shipping costs: 0.00 £
Teknik A20Q-PWLNR-06 Through Coolant Steel Boring Bar for WNMG from Teknik
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Teknik A20Q-PWLNR-06 Through Coolant Steel Boring Bar for WNMG
from Teknik
found at Amazon
63.68 £
Shipping costs: 0.00 £
Micro 100, BBM-040313X, Right Hand Boring Tool (No Cutting Radius) AlTiN Coated, Metric Dimensions, 3mm Minimum Bore Diameter, 134mm Maximum Bore Depth, 0.75mm Projection, 4mm Shank Diameter, 50mm Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100, BBM-040313X, Right Hand Boring Tool (No Cutting Radius) AlTiN Coated, Metric Dimensions, 3mm Minimum Bore Diameter, 134mm Maximum Bore Depth, 0.75mm Projection, 4mm Shank Diameter, 50mm Overall Length, Solid Carbide Tool
found at Amazon Marketplace
24.55 £
Shipping costs: 3.55 £
Korloy 6-01-012049 STFCR 12mm Diameter Boring Bar Carbide Shank Right Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 6-01-012049 STFCR 12mm Diameter Boring Bar Carbide Shank Right Hand
from Korloy
found at Amazon
103.72 £
Shipping costs: 0.00 £
Korloy 1-06-001830 SCLCL 8mm Diameter Boring Bar Steel Shank Left Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-001830 SCLCL 8mm Diameter Boring Bar Steel Shank Left Hand
from Korloy
found at Amazon
32.23 £
Shipping costs: 0.00 £
Korloy 6-01-012116 SCLCR 12mm Diameter Through Coolant Boring Bar Carbide Shank Right Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 6-01-012116 SCLCR 12mm Diameter Through Coolant Boring Bar Carbide Shank Right Hand
from Korloy
found at Amazon
140.77 £
Shipping costs: 0.00 £
Korloy 1-06-004602 SVQCL 16mm Diameter Boring Bar Steel Shank Left Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-004602 SVQCL 16mm Diameter Boring Bar Steel Shank Left Hand
from Korloy
found at Amazon
39.67 £
Shipping costs: 0.00 £
Korloy 1-06-038804 CSKPL 20mm Diameter Boring Bar Steel Shank Left Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-038804 CSKPL 20mm Diameter Boring Bar Steel Shank Left Hand
from Korloy
found at Amazon
69.78 £
Shipping costs: 0.00 £
Korloy 1-06-018672 SVQCL 25mm Diameter Boring Bar Steel Shank Left Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-018672 SVQCL 25mm Diameter Boring Bar Steel Shank Left Hand
from Korloy
found at Amazon
55.20 £
Shipping costs: 0.00 £
Micro 100 QMBB-050150 Quick Change Miniature Boring Tool, Solid Carbide Tool, 0.050"(1.27 mm) Minimum Bore Diameter, 0.150" (3.8 mm) Maximum Bore Depth, 0.013" (0.33 mm) Projection, 0.1875" (4.8 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100 QMBB-050150 Quick Change Miniature Boring Tool, Solid Carbide Tool, 0.050"(1.27 mm) Minimum Bore Diameter, 0.150" (3.8 mm) Maximum Bore Depth, 0.013" (0.33 mm) Projection, 0.1875" (4.8 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length
found at Amazon Marketplace
6.26 £
Shipping costs: 3.57 £
Korloy 1-06-018733 DWLNR 25mm Diameter Through Coolant Boring Bar Steel Shank Right Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-018733 DWLNR 25mm Diameter Through Coolant Boring Bar Steel Shank Right Hand
from Korloy
found at Amazon
95.08 £
Shipping costs: 0.00 £
Micro 100 QMFR-015-500-100X Quick Change Miniature Full Radius Grooving Tool, Solid Carbide Tool, AlTiN Coated, 0.015" (0.38 mm) Groove Width, 0.030" (0.76 mm) Projection, 0.100"(2.54 mm) Minimum Bore Diameter, 0.500" (12.7 mm) Maximum Bore Depth, 0.1875" (4.8 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100 QMFR-015-500-100X Quick Change Miniature Full Radius Grooving Tool, Solid Carbide Tool, AlTiN Coated, 0.015" (0.38 mm) Groove Width, 0.030" (0.76 mm) Projection, 0.100"(2.54 mm) Minimum Bore Diameter, 0.500" (12.7 mm) Maximum Bore Depth, 0.1875" (4.8 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length
found at Amazon Marketplace
8.33 £
Shipping costs: 3.55 £
Micro 100 QFR-038-6 Quick Change Full Radius Grooving Tool, Solid Carbide Tool, 0.038" (0.97 mm) Groove Width, 0.100" (2.54 mm) Projection, 0.310" (7.9 mm) Minimum Bore Diameter, 0.375" (9.5 mm) Maximum Bore Depth, 0.3125" (7.9 mm) Shank Diameter, 2" (51 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100 QFR-038-6 Quick Change Full Radius Grooving Tool, Solid Carbide Tool, 0.038" (0.97 mm) Groove Width, 0.100" (2.54 mm) Projection, 0.310" (7.9 mm) Minimum Bore Diameter, 0.375" (9.5 mm) Maximum Bore Depth, 0.3125" (7.9 mm) Shank Diameter, 2" (51 mm) Overall Length
found at Amazon Marketplace
51.21 £
Shipping costs: 3.60 £
Sandvik Coromant A16T-SVPBL 3 Steel CoroTurn 107 Boring Bar, 1.00" Shank Diameter, Internal Coolant Supply from Sandvik Coromant
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Sandvik Coromant A16T-SVPBL 3 Steel CoroTurn 107 Boring Bar, 1.00" Shank Diameter, Internal Coolant Supply
found at Amazon Marketplace
204.05 £
Shipping costs: 7.14 £
Teknik A14-16Q-SCLCR-09 Through Coolant Boring Bar for CCMT/CCGT from Teknik
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Teknik A14-16Q-SCLCR-09 Through Coolant Boring Bar for CCMT/CCGT
from Teknik
found at Amazon
40.50 £
Shipping costs: 0.00 £
Korloy 6-01-016667 SDUCL 20mm Diameter Boring Bar Carbide Shank Left Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 6-01-016667 SDUCL 20mm Diameter Boring Bar Carbide Shank Left Hand
from Korloy
found at Amazon
272.65 £
Shipping costs: 0.00 £
KYOCERA MBE-1378.984 Micro Boring bar, Carbide, 5 mm Shank Diameter, 25 mm Max Bore Depth, 50 mm Length from Kyocera
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
KYOCERA MBE-1378.984 Micro Boring bar, Carbide, 5 mm Shank Diameter, 25 mm Max Bore Depth, 50 mm Length
from Kyocera
found at Amazon Marketplace
7.13 £
Shipping costs: 3.56 £
Aloris Tool BB-1 Reversible Boring Bar from Aloris Tool
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Aloris Tool BB-1 Reversible Boring Bar
found at Amazon Marketplace
48.16 £
Shipping costs: 5.12 £
Micro 100 MBB-035100X Miniature Right Hand Boring Tool, Aluminum/Tin Coated, 0.035" Minimum Bore Diameter, 0.100" Maximum Bore Depth, 0.1875" Shank Diameter, 1.5" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100 MBB-035100X Miniature Right Hand Boring Tool, Aluminum/Tin Coated, 0.035" Minimum Bore Diameter, 0.100" Maximum Bore Depth, 0.1875" Shank Diameter, 1.5" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
32.79 £
Shipping costs: 3.53 £
Teknik S40V-CKUNR-16 Steel Boring Bar for KNUX from Teknik
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Teknik S40V-CKUNR-16 Steel Boring Bar for KNUX
from Teknik
found at Amazon
97.88 £
Shipping costs: 0.00 £
Sandvik Coromant A04F-STFCR 1.2 CoroTurn 107 boring bar for turning from Sandvik Coromant
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Sandvik Coromant A04F-STFCR 1.2 CoroTurn 107 boring bar for turning
found at Amazon
116.29 £
Shipping costs: 0.00 £
Sandvik Coromant A25T-SDUCL11HP-R CoroTurn 107 boring bar for turning from Sandvik Coromant
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Sandvik Coromant A25T-SDUCL11HP-R CoroTurn 107 boring bar for turning
found at Amazon
203.87 £
Shipping costs: 0.00 £
Korloy 1-06-001927 SCLPR 20mm Diameter Boring Bar Steel Shank Right Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-001927 SCLPR 20mm Diameter Boring Bar Steel Shank Right Hand
from Korloy
found at Amazon
35.89 £
Shipping costs: 0.00 £
Micro 100, BB-110600X, Right Hand Cutting Radius Boring Tool, AlTiN Coated, 0.110" Minimum Bore Diameter, 0.600" Maximum Bore Depth, 0.028" Projection, 0.003" Tool Radius, 1/8" Shank Diameter, 1-1/2" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100, BB-110600X, Right Hand Cutting Radius Boring Tool, AlTiN Coated, 0.110" Minimum Bore Diameter, 0.600" Maximum Bore Depth, 0.028" Projection, 0.003" Tool Radius, 1/8" Shank Diameter, 1-1/2" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
26.02 £
Shipping costs: 3.53 £
KYOCERA MBE-0197L079 Micro Boring Bar, Carbide, 3 mm Shank Diameter, 2 mm Max Bore Depth, 38 mm Length from Kyocera
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
KYOCERA MBE-0197L079 Micro Boring Bar, Carbide, 3 mm Shank Diameter, 2 mm Max Bore Depth, 38 mm Length
from Kyocera
found at Amazon Marketplace
8.13 £
Shipping costs: 3.57 £
Korloy 1-06-038653 SCLPL 16mm Diameter Through Coolant Boring Bar Steel Shank Left Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-038653 SCLPL 16mm Diameter Through Coolant Boring Bar Steel Shank Left Hand
from Korloy
found at Amazon
60.63 £
Shipping costs: 0.00 £
Micro 100 UC-50093-24X Right Hand Undercut Grooving Tool, AlTIN Coated, 0.093"/.095" Groove Width, 0.150" Projection, 0.510" Minimum Bore Diameter, 1.500" Maximum Bore Depth, 0.5000" Shank Diameter, 3" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100 UC-50093-24X Right Hand Undercut Grooving Tool, AlTIN Coated, 0.093"/.095" Groove Width, 0.150" Projection, 0.510" Minimum Bore Diameter, 1.500" Maximum Bore Depth, 0.5000" Shank Diameter, 3" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
84.03 £
Shipping costs: 3.77 £
Micro 100 QMFR-030-375-080X Quick Change Miniature Full Radius Grooving Tool, Solid Carbide Tool, AlTiN Coated, 0.030" (0.76 mm) Groove Width, 0.025" (0.64 mm) Projection, 0.080"(2.03 mm) Minimum Bore Diameter, 0.375" (9.5 mm) Maximum Bore Depth, 0.1875" (4.8 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100 QMFR-030-375-080X Quick Change Miniature Full Radius Grooving Tool, Solid Carbide Tool, AlTiN Coated, 0.030" (0.76 mm) Groove Width, 0.025" (0.64 mm) Projection, 0.080"(2.03 mm) Minimum Bore Diameter, 0.375" (9.5 mm) Maximum Bore Depth, 0.1875" (4.8 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length
found at Amazon Marketplace
7.70 £
Shipping costs: 3.55 £
Micro 100, BB-3601600SX, Right Hand Boring Tool (No Cutting Radius), AlTiN Coated, 0.360" Minimum Bore Diameter, 1.600" Maximum Bore Depth, 0.090" Projection, 3/8" Shank Diameter, 2-1/2" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100, BB-3601600SX, Right Hand Boring Tool (No Cutting Radius), AlTiN Coated, 0.360" Minimum Bore Diameter, 1.600" Maximum Bore Depth, 0.090" Projection, 3/8" Shank Diameter, 2-1/2" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
55.20 £
Shipping costs: 3.72 £
Micro 100 QBB-320500 Right Hand Cutting Radius Quick Change Boring Tool, Solid Carbide Tool, 0.320"(8.13 mm) Minimum Bore Diameter, 0.500" (12.7 mm) Maximum Bore Depth, 0.080" (2.03 mm) Projection, 0.005" (0.13 mm) Tool Radius, 0.3750" (9.5 mm) Shank Diameter, 2"(51 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100 QBB-320500 Right Hand Cutting Radius Quick Change Boring Tool, Solid Carbide Tool, 0.320"(8.13 mm) Minimum Bore Diameter, 0.500" (12.7 mm) Maximum Bore Depth, 0.080" (2.03 mm) Projection, 0.005" (0.13 mm) Tool Radius, 0.3750" (9.5 mm) Shank Diameter, 2"(51 mm) Overall Length
found at Amazon Marketplace
56.05 £
Shipping costs: 3.68 £
Micro 100 MBB-045100 Miniature Right Hand Boring Tool, 0.045" Minimum Bore Diameter, 0.100" Maximum Bore Depth, 0.1875" Shank Diameter, 1.5" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100 MBB-045100 Miniature Right Hand Boring Tool, 0.045" Minimum Bore Diameter, 0.100" Maximum Bore Depth, 0.1875" Shank Diameter, 1.5" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
6.75 £
Shipping costs: 3.55 £
Korloy 1-06-018657 SDUCL 25mm Diameter Boring Bar Steel Shank Left Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-018657 SDUCL 25mm Diameter Boring Bar Steel Shank Left Hand
from Korloy
found at Amazon
55.20 £
Shipping costs: 0.00 £
Micro 100 QRR-030-4 Quick Change Retaining Ring Grooving Tool, Solid Carbide Tool, 0.030" (0.76 mm) Groove Width, 0.050" (1.27 mm) Projection, 0.245" (6.2 mm) Minimum Bore Diameter, 0.250" (6.4 mm) Maximum Bore Depth, 0.2500" (6.4 mm) Shank Diameter, 2" (51 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100 QRR-030-4 Quick Change Retaining Ring Grooving Tool, Solid Carbide Tool, 0.030" (0.76 mm) Groove Width, 0.050" (1.27 mm) Projection, 0.245" (6.2 mm) Minimum Bore Diameter, 0.250" (6.4 mm) Maximum Bore Depth, 0.2500" (6.4 mm) Shank Diameter, 2" (51 mm) Overall Length
found at Amazon Marketplace
10.64 £
Shipping costs: 3.60 £
Korloy 1-06-017468 SSKCR 20mm Diameter Through Coolant Boring Bar Steel Shank Right Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-017468 SSKCR 20mm Diameter Through Coolant Boring Bar Steel Shank Right Hand
from Korloy
found at Amazon
69.74 £
Shipping costs: 0.00 £
HHIP 6004-9031 TCMT-32.51 Triangle(+Rake) Insert-TiN(C6) from HHIP
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
HHIP 6004-9031 TCMT-32.51 Triangle(+Rake) Insert-TiN(C6)
from HHIP
found at Amazon Marketplace
37.18 £
Shipping costs: 3.99 £
HHIP 1001-0757 Round Shank Indexable Boring Bar, 4-1/4" x 5/8" from HHIP
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
HHIP 1001-0757 Round Shank Indexable Boring Bar, 4-1/4" x 5/8"
from HHIP
found at Amazon
28.12 £
Shipping costs: 0.00 £
Women Clutch Bag friendGG Retro Leather Shoulder Bags Corssbody Handbag Messenger Handbags Packet Coin Purses Tote Wallets (26.5cm(L)*11.5cm(W)*21cm(H)/10.43(L)*4.52(W)*8.26(, Pink) from friendGG_Bags&wallet
found at Amazon Marketplace
last verified on 2018-12-09 at 20:13; the price may have changed since.
Women Clutch Bag friendGG Retro Leather Shoulder Bags Corssbody Handbag Messenger Handbags Packet Coin Purses Tote Wallets (26.5cm(L)*11.5cm(W)*21cm(H)/10.43(L)*4.52(W)*8.26(, Pink)
found at Amazon Marketplace
13.68 £15.00 £
Shipping costs: 1.99 £
- 9%
Korloy 6-01-012125 SWUBR 6mm Diameter Through Coolant Boring Bar Carbide Shank Right Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 6-01-012125 SWUBR 6mm Diameter Through Coolant Boring Bar Carbide Shank Right Hand
from Korloy
found at Amazon
97.80 £
Shipping costs: 0.00 £
Micro 100, BBL-3201000X, Left Hand Cutting Radius Boring Tool, AlTiN Coated, 0.320" Minimum Bore Diameter, 1.000" Maximum Bore Depth, 0.080" Projection, 0.005" Tool Radius, 3/8" Shank Diameter, 2-1/2" Overall Length, Solid Carbide Tool Coated from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100, BBL-3201000X, Left Hand Cutting Radius Boring Tool, AlTiN Coated, 0.320" Minimum Bore Diameter, 1.000" Maximum Bore Depth, 0.080" Projection, 0.005" Tool Radius, 3/8" Shank Diameter, 2-1/2" Overall Length, Solid Carbide Tool Coated
found at Amazon Marketplace
56.54 £
Shipping costs: 3.72 £
Korloy 1-06-001974 STFCL 32mm Diameter Boring Bar Steel Shank Left Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-001974 STFCL 32mm Diameter Boring Bar Steel Shank Left Hand
from Korloy
found at Amazon
59.53 £69.43 £
Shipping costs: 0.00 £
- 14%
Korloy 1-06-004791 PTFNR 40mm Diameter Through Coolant Boring Bar Steel Shank Right Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-004791 PTFNR 40mm Diameter Through Coolant Boring Bar Steel Shank Right Hand
from Korloy
found at Amazon
129.84 £
Shipping costs: 0.00 £
Sandvik Coromant LAG123K11-40B CoroCut 1-2 boring bar for grooving from Sandvik Coromant
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Sandvik Coromant LAG123K11-40B CoroCut 1-2 boring bar for grooving
found at Amazon
305.73 £
Shipping costs: 0.00 £
Korloy 6-01-012057 STFPR 10mm Diameter Boring Bar Carbide Shank Right Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 6-01-012057 STFPR 10mm Diameter Boring Bar Carbide Shank Right Hand
from Korloy
found at Amazon
100.76 £
Shipping costs: 0.00 £
Korloy 1-06-018624 PDSNR 32mm Diameter Boring Bar Steel Shank Right Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-018624 PDSNR 32mm Diameter Boring Bar Steel Shank Right Hand
from Korloy
found at Amazon
76.04 £
Shipping costs: 0.00 £
Micro 100 QIT-120600X Quick Change Internal Single Point Threading Tool, Solid Carbide Tool, AlTiN Coated, 0.120 (3.05 mm) Minimum Bore Diameter, 0.030 (0.76 mm) Projection, 0.600 (1.2 mm) Maximum Bore Depth, 0.017 (0.043 mm) Offset Point, 24 to 56 Threads per Inch, 0.1875 (4.8 mm) Shank Diameter, 2 (51 mm) Overall Length by Micro 100 from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100 QIT-120600X Quick Change Internal Single Point Threading Tool, Solid Carbide Tool, AlTiN Coated, 0.120 (3.05 mm) Minimum Bore Diameter, 0.030 (0.76 mm) Projection, 0.600 (1.2 mm) Maximum Bore Depth, 0.017 (0.043 mm) Offset Point, 24 to 56 Threads per Inch, 0.1875 (4.8 mm) Shank Diameter, 2 (51 mm) Overall Length by Micro 100
found at Amazon Marketplace
62.36 £
Shipping costs: 2.80 £
Glanze SCLCR 2 Kit Indexable Boring Bars Coolant Through 4pc. SCLCR2 from Glanze
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Glanze SCLCR 2 Kit Indexable Boring Bars Coolant Through 4pc. SCLCR2
from Glanze
found at Amazon Marketplace
158.55 £
Shipping costs: 6.15 £
Korloy 1-06-018194 SDUCR 20mm Diameter Boring Bar Steel Shank Right Hand from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-018194 SDUCR 20mm Diameter Boring Bar Steel Shank Right Hand
from Korloy
found at Amazon
48.60 £
Shipping costs: 0.00 £
Micro 100, BB-360500SX, Right Hand Boring Tool (No Cutting Radius), AlTiN Coated, 0.360" Minimum Bore Diameter, 0.500" Maximum Bore Depth, 0.090" Projection, 3/8" Shank Diameter, 2-1/2" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2018-12-09 at 20:43; the price may have changed since.
Micro 100, BB-360500SX, Right Hand Boring Tool (No Cutting Radius), AlTiN Coated, 0.360" Minimum Bore Diameter, 0.500" Maximum Bore Depth, 0.090" Projection, 3/8" Shank Diameter, 2-1/2" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
55.20 £
Shipping costs: 3.72 £